Just try not to grin on an indoor swing. "They remind me of my childhood, spark creativity, and therefore are, of course, super comfy," says Dayna Isom Johnson, Etsy's resident fashion expert, who happens to have a few in her office. She's not the least bit surprised that decorators and Instagrammers equally are currently obsessed. |} Neither is designer Starrett Zenko Ringbom, that attributes the tendency to a rise in the energetic side of design:"It's the nervousness people get when they are decorating their houses that holds them back from becoming daring --I believe people are letting go of that."
If you, too, are letting go and trying to infuse a little additional experience in your house in the form of an indoor swing or hanging seat, here's what you need to know. It's true, you can DIY it, but you need to know what you are doing--take it from a pro. pro and Taskrabbit tasker, told House Beautiful about the swing-hanging process.|}
Step 1: Choose Your Location
Together with ensuring the swing itself can fit in your preferred spot, you need to make sure there's sufficient room about it. "Choose a spot that allows for three or more feet of distance behind the swing, and at least 14 inches on either side to prevent hitting a wall or railing," Chenkin advises.
Step 2: Locate the Ceiling Joist
It might be the second measure, but it's definitely the most significant. You need to locate a solid ceiling joist to mount the swing into, and in the event that you can't locate a solid ceiling joist in your chosen place, it's back to square one--with the right amount of space doesn't mean anything if it can't be safely installed .
"If you do not find a solid joist, installers risk attaching the swing mount to a ceiling that cannot support this, or worse--it can pull the ceiling down on the person sitting in the fold," Chenkin states. "If the only spot you've got to get a swing can't support the load, you need to consider another location or using a mounting plate."
And you need to be careful, because not all of ceilings can hold the weight of a swing. When they seem strong,"a few ceilings are strictly decorative," he clarifies. "Most suspended ceilings aren't designed to hold any actual weight."
Chenkin also adds that you may need to mount a board across the joists to"ensure adequate support for your swing," which would require opening up the ceiling and also adding additional support.
Step 3: Install (and Check! ) ) |} the Mount
As soon as you've obtained your place --and also a ceiling joist with proper support--it's time to install the mount. So, let us talk about weight loss requirements:"A single person swing should have a mount of 600 pounds capacity or longer," Chenkin states, noting a double fold requires two mounts.
Now, for your install. To begin with, you need to pre-drill holes and utilize appropriate lag bolts to attach the mounting. |} Then you need to test it out--before you actually hang the swing. "Test it together with your full body fat by hanging on the mount," he clarifies.
Measure 4: Hang the Swing|}
"After the mount is set up, attach the fold and then double-check the fold cable or ropes to ensure it's strong," Chenkin states. When you hang the swing, then you'll need to make sure it's in the proper elevation --normally which should be somewhere between 18 and 24 inches from the ground.